Walden Environmental Engineering Captures New Insights and Revenue

Emesent Hovermap simplifies and streamlines complex projects to improve efficiency.

Sponsored Content


Walden Environmental Engineering (Walden) launched operations in 1995 and touts a long list of clients served by our highly experienced team of engineers, geologists, and environmental scientists. The company is a full-service engineering consulting firm dedicated to helping clients solve environmental and civil engineering concerns.

Walden delivers a breadth of services that include air quality and air emissions permitting, petroleum and chemical storage, site investigations and remediation, business and transaction advisory services, drones and remote sensing, environmental services and consulting, solid waste permitting, water quality, and more.

Walden’s relationship with Harkin Aerial dates back to 2017, when the engineering firm began tapping Harkin Aerial for their drone expertise. “The number and types of projects involving drones and scanning technologies have expanded over the past four years,” says Scott Harrigan, the president and chief pilot at Harkin Aerial. “We have a toolbox full of different solutions that benefit Walden.”


One of the areas where Harkin Aerial has provided Walden key support is the use of LiDAR—both on drones and walking. “We’ve worked on a few projects now with Harkin,” said Robert LoPinto, VP and Senior Project Manager. “Each project has been a success and I’m pleased to work at a company like Walden that continues to be at the front of integrating the latest technology into our work, like LiDAR.” As the relationship has matured and grown, Harkin Aerial has helped Walden tackle new and different engineering challenges.


Last fall was one such instance, when Walden turned to Harkin Aerial for help to scan piles of waste stored inside a metal building belonging to a local sanitation department. The objective was twofold. Walden sought to pinpoint the amount of waste stored in the building so that it could determine the total number of loads required to transfer it to another facility. Second, the scan results were compared to the regulations on the distance that must be maintained between mulch piles and the height of the piles.

“Traditional photogrammetry would simply not work,” Harrigan notes. “There was no GPS navigation connectivity inside the metal building. Lack of lighting was also a challenge. There were too many shadows for us to capture an accurate picture without the use of LiDAR.”

“With photogrammetry, you really have to focus on what you want to scan. For the waste depot and incinerator stacks, I would have had to spend a lot more time at the site, taking specific pictures to get a good model. With Hovermap and LiDAR, you just fly around it. Hovermap is always scanning.”

Scott Harrigan, President and Chief Pilot, Harkin Aerial


Not to be thwarted, Harrigan simply reached into his toolbox and pulled out a different tool—Hovermap from Emesent. “With Hovermap, we can fly drones autonomously without GPS,” Harrigan continues. “In a matter of 15 minutes, we were able to capture a full view of the building interior and the different waste piles. We couldn’t use tripod scanners because they can’t see above the piles and would not get the height.”

Once Harrigan and his team were done scanning the interior, they took Hovermap outside and scanned the exterior of the building. It took less than 45 minutes to complete the scan.

“If we had used photogrammetry with tripods, it would have taken us at least half a day to capture the images—and they would have lacked the amount of detail we captured with Hovermap,” Harrigan explains. “For example, detail around the incinerator stacks at the site could not have been gathered with tripods. To add context for Walden, we used the Colorization feature in Hovermap which enhances the client’s visualization and analysis.” Heaney agreed, “Use of the Colorization feature resulted in scans that were rich and detailed. I was quite impressed with how little time it took to produce something so effective.”

In just 15 minutes, Harkin Aerial scanned the building interior and the different waste piles using Hovermap. Traditional tripod scanners were not suited to this project because they can’t see above the piles and would not get the height.



The second project that Harrigan cites as an example of Hovermap is one that Harkin Aerial recently completed for Walden. “It was a large apartment complex in New York City where Walden needed to drill from one building basement into the underground heating oil storage tank area in the adjacent building in order to collect samples,” Harrigan says. “It’s actually very complicated. You must drill horizontally through the building wall, but the location is through a front door, down a flight of stairs, down a hallway, and into a basement. With an insane amount of trigonometry, it is almost impossible to figure out all of these crazy angles—if you even can.”


For this project, Harrigan simply scanned the street level and the complex interior features with Hovermap to map out the sampling locations. “With tripod scanning, it would have taken me at least half a day to scan the interior,” he relates. “Even then, depending on the environment, I may not have been able to get every angle needed.” With Hovermap, Harrigan walked the location in about 10 minutes. He also saved valuable time because he didn’t need to scout the site the day before. As long as he is able to walk through the area, Hovermap can scan it.

“For the project completed to evaluate the underground oil storage area, we were able to capture a complex environment in under 15 minutes. A tripod scanner would have taken hours to complete, not to mention an additional planning visit to scout out the site the day before. We captured the exterior with Hovermap on a drone and used the colorization feature to give the client additional context for visualization and analysis.”

Scott Harrigan, President and Chief Pilot, Harkin Aerial

While onsite, Harrigan also captured the exterior of the building by attaching Hovermap to one of his drones—a 15-minute exercise versus half a day with traditional photogrammetry. “A portion of the building is
in an alley and there were a lot of shadows,” he says. “With tripods and photogrammetry, this would have been a problem but not with Hovermap.” Harrigan likes to capture exterior images during a shoot when possible. “Our clients like Walden may not need them right now, but the images will save them a lot of time pulling plans and photocopying them when it comes time to do work on the building,” he explains.

Using Hovermap with the colorization option, Harkin Aerial took less than 45 minutes to scan the exterior for an as-built. If using photogrammetry with tripods, the scanning task would have taken at least half a day to capture the images. The processing time would have been much greater and the final product would have lacked the amount of detail we captured with Hovermap.


Applying Emesent Hovermap technology as described above was a new undertaking for Walden and Harkin Aerial. “Walden is always excited to bring opportunities for increased efficiencies to our clients,” said Heaney. “We believe that incorporating the tools available to us through our partnership with Harkin will benefit many clients.”

Hovermap offers tremendous flexibility. “We can seamlessly go from deploying it on a drone to walking,” Harrigan notes. “We are not constrained to one particular mode of capture.”

“One other aspect that sometimes gets missed is that, with Hovermap, the flight patterns for each return scan can be mirrored,” Harrigan adds. “With autonomous capabilities, we can fly the drone the same way we did the previous time. This is particularly valuable with repeat projects, where changes in site conditions need to be evaluated and reported
on a regular basis. Hovermap saves us a lot of time while reducing the overall cost to Walden and the client.”

The time spent uploading data from Hovermap into Harkin Aerial’s storage systems is faster with Hovermap versus photogrammetry captures. “The Emesent software processed the raw data into point clouds quickly, we can do that on site,” Harrigan says. “The amount of data transfer and storage consumed are less than photogrammetry.”

“If we had used traditional surveying tools to map out the sampling locations inside the building,
it would have taken us significantly longer to achieve the same results. We are always looking for ways to improve efficiency and save our clients’ time and money.”

Joseph Heaney III, P.E., President, Walden Environmental Engineering

Harrigan envisions many more opportunities to apply Hovermap as Walden expands its business to include many more projects in the New York metropolitan area and beyond. “Any emerging technology that allows us to work more efficiently and accurately is a bonus for Walden and our clients,” said Heaney.

One of the initial customers for Hovermap in the United States in 2018, Harkin Aerial views Hovermap as a pivotal instrument in its toolbox. “Customers like Walden get huge value out of our use of Hovermap,” Harrigan concludes. “We were an early adopter of this innovative system, and we continue to find new ways to leverage it.”

“Customers like Walden get huge value out of our use of Hovermap. We were an early adopter of this innovative system, and we continue to find new ways to leverage it.”

Scott Harrigan, President and Chief Pilot, Harkin Aerial

Leave a Reply

Your email address will not be published. Required fields are marked *